Abstract:  Heavy rainfalls, between 25 and 100 mm·h–1, were simulated on Pliocene/Quaternary sediments. To reproduce the heterogeneity of natural environments, 231 small plots of various sizes (between 2.5 and 3.5 m2; mean: about 3 m2) were used. The duration of all simulations was 1 h. We used water that had been collected during natural rainfall. The concentration of clay particles in the sheet wash depended upon the concentration of dissolved sodium in the wash (for about 42%) and of the sheet wash quantity (for about 37%). Under natural water conditions colloidal matter, like clay minerals, is charged negatively and therefore is destabilized by metal cations such as in the case of Na+. Results suggest that relatively higher concentrations of montmorrillonite were related to higher concentrations of sodium as opposed to illite and kaolinite. Microflakes of up to 25 μ were observed to vary between face-to-edge and face-to-face modes (competition between protons and other cations). The concentration of dissolved sodium (Na+) in the runoff water depends on water and sodium balances such as atmospheric input, infiltration, evaporation and surface water runoff. The reduction of vegetation cover increases the amount of salt and amorphous matter in/on the topsoil between heavy rainfall generations. The best predictor to explain montmorillonite, illite and kaolinite in % of mineral clay-sized matter in the surface water runoff (sheet wash) is the percentage of each clay mineral in the topsoil. As opposed to illite and kaolinite, more sheet wash indicate for montmorillonite relatively higher concentrations in the wash. The results of model simulations were confirmed on different field plots of about 1 ha and small catchments during natural heavy rainfall events. Models can also be used to understand and to better simulate sheet, rill and gully erosion, micropedimentation; and pedimentation.

Abstract: In the coastal region of Bangladesh, groundwater is mainly used for domestic and agricultural purposes, but salinization of many groundwater resources limits its suitability for human consumption and practical application. This paper reports the results of a study that has mapped the salinity distribution in different aquifer layers up to a depth of 300 m in a region bordering the Bay of Bengal based on the main hydrochemistry and has investigated the origin of the salinity using Cl/Br ratios of the samples. The subsurface consists of a sequence of deltaic sediments with an alternation of more sandy and clayey sections in which several aquifer layers can be recognized. The main hydrochemistry shows different main water types in the different aquifers, indicating varying stages of freshening or salinization processes. The most freshwater, soft NaHCO3-type water with Cl concentrations mostly below 100 mg/l, is found in the deepest aquifer at 200-300 m below ground level (b.g.l.), in which the fresh/saltwater interface is pushed far to the south. Salinity is a main problem in the shallow aquifer systems, where Cl concentrations rise to nearly 8000 mg/l and the groundwater is mostly brackish NaCl water. Investigation of the Cl/Br ratios has shown that the source of the salinity in the deep aquifer is mixing with old connate seawater and that the saline waters in the more shallow aquifers do not originate from old connate water or direct seawater intrusion, but are derived from the dissolution of evaporite salts. These must have been formed in a tidal flat under influence of a strong seasonal precipitation pattern. Long dry seasons with high evaporation rates have evaporated seawater from inundated gullies and depressions, leading to salt precipitation, while subsequent heavy monsoon rains have dissolved the formed salts, and the solution has infiltrated in the subsoil, recharging groundwater.