Greene, R., Timms, W., Rengasamy, P., Arshad, M., & Cresswell, R. (2016). Soil and Aquifer Salinization: Toward an Integrated Approach for Salinity Management of Groundwater. In A. J. Jakeman, O. Barreteau, R. J. Hunt, J. - D. Rinaudo, & A. Ross (Eds.), Integrated Groundwater Management: Concepts, Approaches and Challenges (pp. 377–412). Cham: Springer International Publishing.
Abstract: Degradation of the quality of groundwater due to salinization processes is one of the key issues limiting the global dependence on groundwater in aquifers. As the salinization of shallow aquifers is closely related to root-zone salinization, the two must be considered together. This chapter initially describes the physical and chemical processes causing salinization of the root-zone and shallow aquifers, highlighting the dynamics of these processes and how they can be influenced by irrigation and drainage practices, thus illustrating the connectivity between soil and groundwater salinization. The processes leading to aquifer salinization in both inland and coastal areas are discussed. The roles of extractive resource industries, such as mining and coal bed methane operations, in causing aquifer salinization are also outlined. Hydrogeochemical changes occurring during salinization of aquifers are examined with the aid of Piper and Mixing Diagrams. The chapter then illustrates the extent of the problem of groundwater salinization as influenced by management and policy using two case studies. The first is representative of a developing country and explores management of salt-affected soils in the Indus Valley, Pakistan, while the second looks at a developed country, and illustrates how through monitoring we can deduce causes of shallow aquifer salinity in the Namoi Catchment of NSW, Australia. Finally, there is a section on integration and conclusions where we illustrate how management to mitigate salinization needs to be integrated with policy to diminish the threat to productivity that occurs with groundwater degradation.
|
Ali, R., Salama, R., Pollock, D., & Bates, L. (2002). Geochemical interactions between groundwater and soil, groundwater recycling and evaporation in the ORIA. CSIRO Land and Water.
|
Jesús Carrera, J. J. H., Luit J. Slooten, Enric Vázquez-Suñé. (2010). Computational and conceptual issues in the calibration of seawater intrusion models. Hydrogeology Journal, 18. Retrieved July 7, 2024, from http://dx.doi.org/10.1007/s10040-009-0524-1
Abstract: The inverse problem of seawater intrusion(SWI) is reviewed. It represents a challenge because of both conceptual and computational difficulties and because coastal aquifer models display many singularities:(1) head measurements need to be complemented with density information; (2) salinity concentration data are
very sensitive to flow within the borehole. Data problems can be reduced by incorporating the measurement process within model calibration; (3) SWI models are extremely sensitive to aquifer bottom topography; (4) the initial conditions may be far from steady state and depend on the location and type of sea-aquifer connection. Problems with aquifer geometry and initial conditions can be addressed by parameterization, which allows for modification during inversion. The four sets of difficulties can be partly overcome by using tidal response and electrical conductivity data, which are highly informative and
provide extensive coverage. Still, SWI inversion is extremely demanding from a computation point of view. Computational improvements are discussed.
|
Siarkos, I., & Latinopoulos, P. (2016). Modeling seawater intrusion in overexploited aquifers in the absence of sufficient data: application to the aquifer of Nea Moudania, northern Greece. Hydrogeology J., 24, 2123–2141.
Abstract: In many coastal areas, overexploitation of groundwater resources has led both to the quantitative degradation of local aquifers and the deterioration of groundwater quality due to seawater intrusion. To investigate the behavior of coastal aquifers under these conditions, numerical modeling is usually implemented; however, the proper implementation of numerical models requires a large amount of data, which are often not available due to the time-consuming and costly process of obtaining them. In the present study, the investigation of the behavior of coastal aquifers under the lack of adequate data is
attempted by developing a methodological framework consisting of a series of numerical simulations: a steady-state, a false-transient and a transient simulation. The sequence and the connection between these simulations constitute the backbone of the whole procedure aimed at adjusting the various
model parameters, as well as obtaining the initial conditions for the transient simulation. The validity of the proposed methodology is tested through evaluation of the model calibration procedure and the estimation of the simulation errors (mean error, mean absolute error, root mean square error, mean relative error) using the case of Nea Moudania basin, northern Greece. Furthermore, a sensitivity analysis is performed in order to minimize the error estimates and thus to maximize the reliability of the models. The results of the whole procedure affirm the proper implementation of the developed methodology under specific conditions and assumptions due to the lack of sufficient data, while they give a clear picture of the aquifer’s quantitative and qualitative status.
|
Schmittner, K. - E., & Giresse, P. (1999). The impact of atmospheric sodium on erodibility of clay in a coastal Mediterranean region. Environmental Geology, 37(3), 195–206.
Abstract: Heavy rainfalls, between 25 and 100 mm·h–1, were simulated on Pliocene/Quaternary sediments. To reproduce the heterogeneity of natural environments, 231 small plots of various sizes (between 2.5 and 3.5 m2; mean: about 3 m2) were used. The duration of all simulations was 1 h. We used water that had been collected during natural rainfall. The concentration of clay particles in the sheet wash depended upon the concentration of dissolved sodium in the wash (for about 42%) and of the sheet wash quantity (for about 37%). Under natural water conditions colloidal matter, like clay minerals, is charged negatively and therefore is destabilized by metal cations such as in the case of Na+. Results suggest that relatively higher concentrations of montmorrillonite were related to higher concentrations of sodium as opposed to illite and kaolinite. Microflakes of up to 25 μ were observed to vary between face-to-edge and face-to-face modes (competition between protons and other cations). The concentration of dissolved sodium (Na+) in the runoff water depends on water and sodium balances such as atmospheric input, infiltration, evaporation and surface water runoff. The reduction of vegetation cover increases the amount of salt and amorphous matter in/on the topsoil between heavy rainfall generations. The best predictor to explain montmorillonite, illite and kaolinite in % of mineral clay-sized matter in the surface water runoff (sheet wash) is the percentage of each clay mineral in the topsoil. As opposed to illite and kaolinite, more sheet wash indicate for montmorillonite relatively higher concentrations in the wash. The results of model simulations were confirmed on different field plots of about 1 ha and small catchments during natural heavy rainfall events. Models can also be used to understand and to better simulate sheet, rill and gully erosion, micropedimentation; and pedimentation.
|